The Specification of the 6g Nano Outrunner Brushless

Item No.

1209

Weight

5.82g

Pedestal Weight

0.85g

External Diameter

13mm

Length (without the pedestal)

11mm

Shaft

1.5mm

Length of Shaft

5mm

Input Voltage

7.4V

KV

2200

Minimum No Load Current

0.1A-0.3A

Max No Load Current

1.6A-1.7A

Minimum Load Current

0.2A

Max Load Current

2.3A

Temperature

30

Drag Force

28g-30g

Propeller

30X20

Notice:
1. Only 2cells (7.4V) li-poly battery would be applied
2. Please use 5A or 10A speed controller only.
3. It's suggested to be installed on indoor planes that under the weight of 50g.
4. The propeller can be changed according to your choice.

Propellers for testing:
1. WGS 30X20 Propeller 2. 108X68 Propeller
The total weight is 6.67g. Although it is 0.63g heavier
than the first kind of sample, this kind of motors wire
size is heavier. So it is more stable and the efficiency is improved evidently.
Power Supply and Device for testing
The voltage is chosen as 7.4V for following tests.
Insert Propeller 30X20 into the rotate axis.
Voltage: 7.4V Pull: 30.89g Temperature: 24.8J Current: 0.67A Rotate: 21583 revolutions/minute
Change another kind of propeller to test. The pull can reach 49.97g.
Change 108X68 Propeller to test. Temperature: 30.1J Current:0.76A
Pull: 55.4g We adjust input voltage. Then the voltage falls to 6.4V and the current is 0.7A. The rotate speed shows as 8775 revolutions/minute.

 
When the voltage is 7.4V and the current is 0.8A, the rotate speed shows as 10605 revolutions/minute.  
 
Back